Tetracyclines rapid test
strip (Egg)
Catalog No. LSY-20046G2d
1. Brief
This product is used for testing Tetracyclines in egg, duck egg etc.
sample qualitatively. The whole test need 10min. Easy to operate,
high sensitivity.
2. Detection limit
Name
|
Detection limit μg/kg(ppb)
|
Tetracycline
|
10
|
Oxytetracyline
|
10
|
Doxycycline
|
10-15
|
Chlortetracycline
|
20
|
3. Contents
1
|
Tetracyclines test strip and micro-well reagent
|
16 strip/bottle, 6
bottle/kit
|
2
|
Instructions
|
1 piece
|
3
|
10X concentrated
sample buffer
|
1 bottle (50ml/bottle)
|
4. Principle
The colloidal gold
immuno-chromatography was used to detect the Tetracyclines residue in the samples. The binding of Tetracyclines to the specific monoclonal antibody labeled with colloidal
gold inhibited the binding of the antibody to the conjugates of Tetracyclines-BSA on the NC membrane Testing line, which resulted in the
color depth variation of the testing line.
5. Testing equipment required
Instruments: balance, micropipette, oscillator (optional), homogenizer
Consumables: 15/50ml
centrifuge tube, disposable tips.
6. Sample buffer:
Dilute 10X concentrated sample
buffer with deionized water at 1:9 to get sample buffer. (for example: 1 part
of 10X concentrated sample buffer + 9 parts of deionized water)
7. Sample preparation
Eggs: take 1g fresh mixed well egg
sample, add 4ml sample
buffer, shake by hand or oscillator strongly for 1min, ready to test.
8. Operation
procedures
8.1 Read the instruction
carefully before use. Return test strips and sample into room temperature.
8.2 Take bottles needed
from the kit package, take out required microwells and dipsticks, making proper
marks. Please use these test dipsticks within 1h. Seal the cap of the bottles,
avoid moisture.
8.3 Take 200ul of the
test samples into the microwells, then slowly aspirate for 5 times, mix the sample with the reagent in the microwells completely, until no
solid observed by eyes (this is a very important step).
8.4 Incubate for 5min at room temperature (20-40℃), then insert the test strips into the microwells with the
"MAX" end fully dipped in to the mixture solution.
8.5 After immersing the test strip in the micro-well for 5 minutes, take out the strip, interpret the results according to the schematic diagram.
Please interpret the results within 1 minutes,
otherwise interpretation will be invalid.
9. Test Result Interpretation
9.1 Negative: T line is
darker than C line, or T line has same color with C line. It means there is no Tetracyclines residue in sample or the
residue is lower than detection limit.
9.2 Positive: T line is obviously lighter than C line or T line is
invisible. It means the Tetracyclines residue is equal to or
higher than detection limit.
9.3 Invalidation: C line isn’t seen wine
red. It means the test strip
is out of efficacy, out of date or improper operation. Please run the test
again using another package. If the invalid tests keep happening, please
contact the supplier.
10. Precautions
1) The test strips can be used only once at room
temperature, do not use test strips out of expiry date.
2) Please seal the bottle after taking out
required test strips. If can not use all 8 micro-wells at once, cup the rest
and put it back to bottle and sealed.
3) Do not touch the white membrane surface in
the middle of test strips, avoid sunlight and fan blowing directly.
4) The egg sample must be a uniform liquid,
without clumping, souring, or precipitation.
5) Use the test strips testing again for
positive results.
6) Please contact the supplier for any
questions.
7) The result is for reference only, for
confirmation, please refer to the relevant national standard method.
11. Safety
performance and garbage disposal
This product's test
strips and packaging are non-toxic and harmless, and should be disposed of as
dry waste after use.
12. Storage
and expiry date
Storage: Store at 2-8 ℃ in dark,
sealed, dry place, no frozen.
Expiry
date: 12 months; date of production is on box.
Shenzhen Lvshiyuan Biotechnology Co., Ltd
D Building,
National Biological Industrial Park of Marinelife, No.2 Binhai Road, Dapeng,
Shenzhen, 518120 China
Tel.
86-755-28438788
Fax
86-755-28938800
Email: info@lsybt.com
www.lsybt.com